T-506 User Manual Version 3.2 | 10
2.7
Instrument Structure
1.
Detector
2.
Adjustable handle
3.
Charger Socket
4.
Detector trigger indicator
5.
On/off button
3.
Working background, principle
3.1
Working background
To locate cable faults, the T-506 needs to be used with a DC High Voltage Surge Generator.
In the field, the discharge cycle and discharge voltage of the surge generator are adjusted as
required, and a discharge signal is applied to the faulty cable. For cables of different voltage
levels, the highest surge voltage allowable will vary. The maximum surge voltage level should
be limited to that specified for the particular cable under test to avoid damage.
In addition to being able to work with the Kehui T-30X series DC high voltage surge
generator and T-1X00 series cable test van, the T-506 can also operate with equipment from
other manufacturers.
[
Warning
] When you use the DC high voltage surge generator, be sure to follow the
appropriate safety procedures and strictly follow the requirements of the DC High Voltage
Surge Generator User Manual.
3
4
5
6
7
8
6. Power indicator
7. Bluetooth connected indicator
8. Handle socket
9. Tablet and harness
10. Headphones
10
9
