Kegel IKON Lane Machine, Operation Manual, Page: 75 / 167

62
CHAPTER
7
Troubleshooting
Inputs and Outputs
PLC Outputs
Go to the main menu and select INPUT/OUTPUT TEST and the screen will change to the
first test screen. Press on an output selection to test, below is an example of the BRUSH
LIFT test. The Brush Lift test also shows the inputs that control the motor to stop in the
proper position. When testing the motor you are also testing and watching for correct
switch operation at the same time.
To check inputs, press on one of the two input screens to view. The inputs that are on
will change color to yellow. To test an input you will need to physically operate the
switch by pressing on it or pass metal by a proximity sensor.
Here is a list of the OUTPUT numbers for the PLC along with their, wire color, and designations
.
OUTPUT DESCRIPTION WIRE COLOR
100.00 OIL CONTROL VALVE ORANGE
100.01 POWER OFF RELAY (
NOT A TEST
) GRAY/YELLOW
100.02 FORWARD DRIVE GREEN / ORANGE
100.03 REVERSE DRIVE YELLOW / VIOLET
100.07 BUFFER MOTOR YELLOW / BLUE
100.06 OIL PUMP MOTOR GRAY/VIOLET
101.00 MOVING HEAD MOTOR DIRECTION (
NOT A TEST
) VIOLET/RED
101.01 MOVING HEAD MOTOR RUN VIOLET/ORANGE
101.02 BRUSH LIFT MOTOR WHITE / BLACK
101.03 SQUEEGEE MOTOR BLUE / WHITE
101.04 DUSTER UNWIND GREEN / BLUE
101.05 DUSTER WIND-UP GREEN / RED
101.07 VACUUM MOTOR BLUE / BLACK