·
·
17
Picture 5 The part amplified view after open the exterior cover of emergency stop switch
The emergency stop switch is at the back of robot, where the mark number 16 in picture
indicated. Starting emergency stop switch needs firstly open the exterior cover upward.
Second, break the PMMA protection plate at medium layer and press down the red
emergency stop switch. Finally, stop robot in emergency.
* Note:
The start of emergency stop switch need to break the emergency stop switch equipment. It
is forbidden to start emergency stop switch under non-emergency situation.
16. Emergency stop switch
25. Emergency stop switch button
26.
Exterior cover of emergency stop switch
(Part amplified view)
Second step, press down the red emergency stop
button then OK
First step, open the exterior cover of
emergency stop switch