Keenon Robotics DINERBOT T8, User Manual, Page: 12 / 36

10
Lifting
- Two people stand on either side of the machine, holding the bottom of the machine with their hands,
holding the machine upright while lifting the machine
* Do not lift other areas; otherwise, the robot may be damaged.
Pushing
- Make sure that the emergency stop button of the machine is pressed, then use both hands to
push the
The rear of the robot's first tray to move the robot.
* Do not pull other areas of the robot violently, as this may cause damage.
Transportation
- Please check the integrity of the packaging box when moving the product in order to prevent
product damage due to handling.
- Do not stack when handling. Do not stack other items on the outer packaging.
- Please keep the direction of the arrow on the box during transportation. Do not
fl ip over, side lay
or upside down the machine.
5.3 Maintenance and Maintenance Interval
The main purpose of robot host maintenance is to check the remnants inside the tray, the
foreign objects around the stereo vision sensor camera and LiDAR, the foreign objects around
the driving wheels and omni-directional wheels, the charging pile, etc. The maintenance period
can be adjusted appropriately according to the environment, frequency, intensity, and
temperature of the machine.
Robot Maintenance Schedule
Interval
No. Unit Level Year Month Week
1 LiDAR Wipe 1 time
2 Sterero Vision Sensors Wipe 1 time
3 Image Module Wipe 1 time
5
4
Omni-directional Wheels Clean 1 time
6 Driving Wheels Clean 2 times
7 Charging Pile Wipe 1 time
Tray Detection Module Wipe 1Time