Quick Start Guide
For technical support or other information, please visit
help.keenetic.com
AC1300 Dual Band Mesh Wi-Fi Gigabit Router with Dual
Core CPU, a 5-Port Gigabit Smart Switch, and 2 USB Ports
Model: KN-1910
4
1
0
2
3
3
Сonnect a mobile device to your Keenetic device via Wi-Fi.
The default Wi-Fi name (SSID) and Wi-Fi password are
printed on your Keenetic device’s back label along with
a QR code that will automatically connect your mobile device
to the Keenetic device’s Wi-Fi when scanned. Alternatively,
сonnect a computer to any gray Ethernet port on your
Keenetic device using the included Ethernet cable.
Installing Your
Keenetic Skipper
4
Once connected, an Initial Setup Wizard window will appear on
your mobile device / computer. If the Wizard does not appear,
using a browser go to
my.keenetic.net
.
Note:
If the Initial Setup Wizard doesn’t appear, please refer
to the Frequently Asked Questions section below.
5
In the Initial Setup Wizard window that appeared, select the
configuration option.
To create a new network
and connect it to the Internet, choose
the appropriate connection type and follow the setup instructions.
To extend an existing network
and add this Keenetic device as
a Wi-Fi extender, choose the ‘To switch to Wi-Fi Extender Mode’
option and follow the setup instructions.
2
Connect your Keenetic device to a power
source. Check that both the Status LED
C
and
Wi-Fi LED
D
are illuminated and not blinking.
1
Position your Keenetic Skipper (hereinafter ‘Keenetic device’)
within cable lengths of Ethernet and power outlets. Place
your Keenetic device in an open area for better wireless
coverage.
10:00
Welcome to
Your Keenetic
Next
