KeeNetic Lite KN-1310, Command Reference Manual

Page: 137 / 320

3.16.94 interface switchport mode
Description Set
access
or
trunk
mode for VLAN . By default,
access
mode is set.
Command with no prefix resets setting to default.
Prefix no Yes
Change settings Yes
Multiple input No
Interface type Port
Synopsis
(config-if)>
switchport mode
[ (
access
[
q-in-q
] ) |
trunk
]
(config-if)>
no switchport mode
Arguments
Description Value Argument
mode
Enable the access mode to a VLAN , that is
the mode when only the untagged frames
access
pass through the port. The incoming
frames get tagged with the PVID marker,
which is set with switchport access
command. The port is an output one only
for VLAN with PVID ID. Once a frame is
transferred to the port, the VLAN marker
gets removed.
Enable the
VLAN trunk mode, that is the
mode when frames belonging to several
trunk
VLANs get transmitted through the port.
In this case each frame gets tagged. The
list of IDs of VLAN networks that include
the port is set with switchport trunk
command.
Enable double tagging.
Keyword q-in-q
Example
(config-if)> switchport mode access
Network::Interface::Switch: "FastEthernet0/1": access mode ►
enabled.
History
Version Description
The interface switchport mode command has been
introduced.
2.06
Keenetic Lite (KN-1310) — Command Reference Guide
137
Chapter 3 Command Reference