KeeNetic EXTRA KN-1710, Command Reference Manual

Page: 135 / 354

Synopsis
(config-if)>
mac access-list type
‹
type
›
Arguments
Description Value Argument
type
Type of filtering list is not defined.
none
Only approved MAC-addresses will be
added to the list.
permit
Only restricted MAC-addresses will be
added to the list.
deny
Example
(config-if)> mac access-list type permit
set access-policy: permit
History
Version Description
The interface mac access-list type command has been
introduced.
2.00
3.20.81 interface mac address
Description Set the MAC-address to the specified network interface. Address is specified
in hexadecimal format
00:00:00:00:00:00
. The command allows one to
assign arbitrary address, but warns the user if the new address “multicast”
bit is set or “OUI enforced” bit is cleared.
Command with no prefix resets the original MAC-addresses on the interface.
Warning: Change MAC-address on Wi-Fi interface is prohibited.
Prefix no Yes
Change settings Yes
Multiple input No
Interface type MAC
Synopsis
(config-if)>
mac address
‹
address
›
(config-if)>
no mac address
Arguments
Description Value Argument
New MAC-address of the interface.
MAC-address mac
Example
(config-if)> mac address 3C:1F:6E:2A:1C:BA
MAC address saved.
Keenetic Extra (KN-1710) — Command Reference Guide
135
Chapter 3 Command Reference