KeyGrabber PS/2
Copyright © www.keelog.com
16
Configuration options
The
KeyGrabber PS/2
may be configured through the file CONFIG.TXT, placed in the flash
drive root folder. All configuration options can be set using the text menu (see section
Text
Menu
). This is the recommended way of configuring the device. However, it is also possible
to configure the device manually, by creating a file named CONFIG.TXT using the following
template:
Password=KBD
LogSpecialKeys=Medium
Language=English
This file should be placed in the root folder of the flash drive by using the USB Download
Accelerator. The new configuration will be loaded on next power-up.
A full list of available parameters with descriptions is available below.
Basic parameter list
Parameter
Values
Example
Description
Password
3-character
password
(default KBS)
Password=SVL
Three-character key combination for
activating flash drive mode.
LogSpecialKeys
None
Medium (default)
Full
LogSpecialKeys=Full
Special key logging level.
DisableLogging
Yes
No (default)
DisableLogging=Yes
Keystroke logging disable flag.
DisableLayout
Yes
No (default)
Menu
DisableLayout=Yes
National layout disable flag (see
section
National keyboard layouts
).
DisableUsb
Yes
No (default)
DisableUsb=Yes
USB flash drive mode disable flag.
Language
English (default)
Deutsch
Espanol
Francais
Language=Espanol
Text menu language.
