22
CHANGE
MENU
DEMO BUTTON
14. User menu options
1.
With the unit switched on and the handpiece removed, press and
hold menu button for more than 3 second to enter the user menu.
2.
The display will show the first user option and the current
selection i.e. [prnt off] or [prnt on].
3.
To change the user option, press the CHANGE button once,
‘toggling’ the CHANGE button will cycle through the option(s).
4.
Pressing the MENU (print) button will move you forward to
the next user option, in this case the buzzer control.
5.
Use the CHANGE (OD/OS) button to make your preferred selection.
Note: to run the self test press the DEMO button, not the
CHANGE button.
6.
Continue to repeat steps 4 and 5 until ‘OK’ is displayed, your
Pulsair intelliPuff is now ready to use with your preferred settings.
Menu option
Display
Change options
Printer control
PRNT
OFF / ON
Buzzer control
BUZ
ON / OFF
IOP Format
IOP:
XX / XX.X
Full self test
RUN
TEST/WAIT
The last choice above “Run Test”
(Selected by pressing Demo button)
would start a self test program
(around 45 seconds), the result of
which should be printed.
Summary of Contents for Pulsair intelliPuff
Page 1: ...Next Instructions for use...
