HD PTZ Camera User Manual
25
4.3.8
SMTP
Picture 4-13 SMTP
Simple Message Transfer Protocol, when an alarm is triggered, the system will send email
notification automatically through SMTP protocol. Configuration steps are as follows:
1) Input SMTP server IP address and port number, which ranges 1 ~ 65535, 25 by default;
2) Input "Sender" and "Sender Address"; optionally select "Server Authentication" and input
correct user name and password;
3) Input email topic; optionally select "Attachment" and choose attached file format, then the
email sent will attach the relative file;
4) Add receiver email address. Input the receiver's email address and click the symbol "+" behind
it and the address will be saved to the list below. Select an address from the list and click the
symbol "-" to remove the email address;
5) Click "
Save
" to validate setting.
Note: This function is available only when email notification is enabled. Method to enable
email notification can be referred to in the chapter of
Intelligent Function
.
