Kedacom KSCA120 Series User Manual Download Page 47

Page: 47 / 86

Access Control System User Manual

To enable this function, go to Settings > Local Setting > Play, select

“

Display Status Info

” and click “Save”.

Video freeze, click this button and the image will freeze at the last

frame before clicking. Click again to recover image. During video

freeze, the PTZ function is disabled.

Full screen, click this button to display in full screen. Double click in

full screen or press Esc to exit.

3.2.2

Playback

Click “

Playback

” to enter the interface of recording management. User can search, view

and download video records in SD card.

Picture 3-14 Playback

Operation steps:

Select recording duration from the calendar. If there is background color on a date,

it means there is recording on that day.

Click "

Search

" and the video will be displayed directly in the timeline on the right

(the highlight parts on the timeline).

Note: Red means alarm video recordings, blue meaning scheduled video

recordings and green meaning manual video recordings.



Alarm recording: Enable video recording when an alarm event occurs such as motion

detection triggered video recording. Go to

Settings > Event > Intelligent Function >

Motion Detection

, and select "Recording Linkage".



Scheduled recording: Enable video recording automatically during certain durations.

Configure on the interface of Settings > Storage > Recording.



Manual recording: When the network is disconnected from VMS or NVR, video

recording will be enabled by default.

Summary of Contents for KSCA120 Series























































































Search results

Summary of Contents for KSCA120 Series

Reviews:

Brands by name

Popular brands

Kedacom KSCA120 Series, User Manual

Search results

Summary of Contents for KSCA120 Series

Reviews:

Brands by name

Popular brands