Vehicle PTZ Camera
User Manual
32
32
4.3.6 *Object Left
Enable this function in the interface to detect specific area at real time. When any object is left in the area,
an alarm will be triggered.
Go to
Settings > Event > Intelligent Function > Object Left
and configure. Setting steps can be referred
to in
Enter Guard Area
.
4.3.7 *Object Removal
Enable this function in the interface to detect specific area at real time. When any object is taken from the
area, an alarm will be triggered.
Go to
Settings > Event > Intelligent Function > Object Removal
and configure. Setting steps can be
referred to in
Enter Guard Area
.
4.3.8 *Gathering
Enable this function in the interface to detect specific area at real time. When moving objects exceed the
sensitivity, an alarm will be triggered. After setting the area and the sensitivity is set 50%, when 50% or
more of the area is covered by moving objects, an alarm will be triggered.
Go to
Settings > Event > Intelligent Function > Gathering
and configure. Setting steps can be referred to
in
Enter Guard Area
.
4.3.9 Abnormality Linkage
Abnormality linkage means the linkage triggered when abnormality occurs. Abnormality type includes Disk
Full, Disk Error and Internet Disconnected.
Setting steps:
1) Go to
Settings > Event > Abnormality Linkage
, and check
“
Enable
”.
2) Select type from the dropdown list of Abnormality Type.
3) Check
Linkage Type
.
4) Click
“
Save
”.
Picture 4-20 Abnormality linkage
