Long-Range Medium-Load PTZ Camera
User Manual
26
main stream, id=1 play secondary stream)
”. RTSP port number is 554 by default, ranging 1 ~
65535.
After finishing
configuration, click “Save”.
4.1.3
Positioning
Go to
Settings > Network > IP and Port > Positioning
and configure the GPS, view current
location and etc.
Picture 4-3 Positioning
Operation steps
:
1)
Select “
Enable
” to enable positioning function;
2)
The default system is “
GPS
”;
3)
Select speed unit, options including “km/h” and “mile/h”;
4) After finishing configuration
, click “
Save
” and view current location below.
4.1.4
Multicast
Go to
Settings > Network > IP and Port > Multicast
and configure multicast parameters such as
Stream Type, Media Type and Multicast Address.
Note: Multicast is a method of data packet transmission. The source host can send the data
packets to every host in the group by sending a datagram only. It also depends on the group
relationship maintenance and selection by the router.