High Speed Dome Camera
User Manual
30
3) Enter alarm name. If the alarm input device is always disabled, which means the circuit is usually
open, user must select
“
Always Disabled
” from the dropdown list of Alarm Type. If the alarm input
device is always enabled, which means the circuit is usually loop, user must select
“
Always Enabled
”
from the dropdown list of Alarm Type. The default setting is
“Always Disabled”.
4) Duration: Click the white bar behind each weekday and drag mouse to make a blue bar as the task
duration for that day. Select the blue bar and adjust or delete duration by mouse. Check several
weekdays or
“
Select All
” and click “
Copy
” to copy the defined motion detection durations to the days;
5) Check
“
Linkage Method
”
.
6) Click
“
Save
”.
Picture 4-18 Alarm input
4.3.11
Abnormality Linkage
Abnormality linkage means the linkage triggered when abnormality occurs. Abnormality type includes Disk
Full, Disk Error and Internet Disconnected.
Setting steps:
1) Go to
Settings > Event > Abnormality Linkage
, and check
“
Enable
”.
2) Select type from the dropdown list of Abnormality Type.
