Kedacom IPC427-D020-N, User Manual

Page: 31 / 53

HD IR Dome Camera User Manual
27
4) Set arming duration: the default duration is 24 hours displaying in blue, or user can define durations up to
request.

Click any free point on the timeline and drag mouse rightward to make a blue bar as task duration for
that day. Different durations cannot overlap. Click on the duration and a window like Picture 4-19 will
pop up. Configure scheduled task on the window.

As shown in Picture 4-19, select a task and configure duration. Set the start time and end time, and
click “Save” to finish scheduled task setting.

Click the icon behind the timeline and the Copy window will pop up. Check several weekdays or
“
Select All
” and click “
Copy
” to copy task durations to the weekdays, as shown in Picture 4-14. Click
“Delete” in Picture 4-18 or
to cancel scheduled task. Click to cancel all the
scheduled tasks in one week.
Picture 4-21 Edit duration
5) Check
“Linkage Type”. It is the alarm output method when motion detection triggers an alarm. If checking
snapshot, when motion detection triggers an alarm, the system will capture an image. Go to Settings >
Storage > Snapshot to set image format, resolution and quality, and enable
“Event Snapshot” and set Time
Interval and Number of Snapshots.
6) Click
“
Save
”.
4.3.2 Tampering
In the surveillance scene, if the camera
’s field of view is blocked by something, it will be unable to monitor
normally. At this time, the tampering detection algorithm can detect that the camera lens has been blocked and
will trigger an alarm. It supports max 1 detection area.
Go to Settings > Event > Intelligent Function > Tampering and configure. Please refer to Motion Detection
part for setting steps.