HD Intelligent Speed Dome Camera
User Manual
107
7.2 Alarm Input
Before starting configuration, make sure that the camera has connected to alarm input devices
such as smoke-detector, alarm bell or sprayer through the parallel port. Configure parameters for
each alarm input devices and the camera will judge by the received alarm signal if it is necessary to
trigger an alarm. Configuration steps are as follows:
1) Go to
Settings > Event > Alarm Input
;
Picture 7-22 Alarm Input
2)
Select “Enable”;
3) Select a number from the dropdown list of
“Alarm Input ID”;
Note: The alarm input ID corresponds to the buttcock line ID. Please refer to the
Quick Start
Guide
for the sequence.
4) Enter alarm name, i.e. the
name of alarm input device such as “front door smoke-detector”;
