A. Laser pointer
B. Infrared sensor
C. Trigger —— ON / Measuring key
D. Battery compartment
E. LCD screen with backlight —— display reading data and other information
F. The middle key ——mode set/parameter set
G. The right down key —— browse saved date/increase preset data
H. The left down key ——temperature units exchange/decrease preset data
I. The right upper key —— switch between infrared and K-thermocouple
J. The left upper left key —— back light on/off and laser on/off
K. type K-thermocouple input socket
Display Illustration
A
：
low temperature indicator B
：
high temperature indicator
C
：
scanning indicator D
：
back light on
E
：
laser on
F
：
low battery
G
：
reading
H
：
measuring method, hold data, set minimum and maximum
temperature , emissivity indicator
I
：
K-thermocouple indicator J
：
data log indicator
K
：
display logged data
L
：
display temperature, max and min temperature set, and emissivity
M
：
Celsius unit N
：
Fahrenheit unit
Operation Steps
1.
Pull the trigger to turn on the meter and hold the trigger for measuring. Be sure to hold the
trigger more than 0.5 seconds to have an accurate reading. The scan icon “
” flashes while
scanning; After the trigger was released, the data is auto saved and the scan icon “
”
disappears, meanwhile the hold icon “
” appears. The product saves the latest 10 sets of
readings automatically. The product shuts off itself if not action in 30 seconds.
2.
While ON status, the left down key on the panel is to exchange the Celsius/Fahrenheit units;
The right down key on the panel is to browse the latest logged 10 sets of readings.
3.
While holding the trigger(scanning temperature), press the left upper key to switch on and off
3
