Handheld Terminal
KeTop - Specific Operating Instructions
User's Manual, Version: 1.3
93
© KEBA 2007
8 KeTop - Specific Operating Instructions
This chapter describes the KeTop-specific settings and the differences to
standard Windows CE devices.
Infomation
•
The date and the time are not stored in the KeTop and, if needed, must
be set anew after turning off/on. The date and the time may be very im-
portant for the log data for example.
Infomation
•
At settings that have not been made with the ConfigTool, the modifica-
tions must be saved as follows:
Start -> Programs -> KeTop -> Registry Backup
(or in the explorer with the command „\windows\RegistryBackup.exe “)
8.1 Setting of Date and Time
During start-up the KeTop shows automatically the window for setting date
and time.
The real time clock is not puffered with a battery. So, if you use real time
clock it must be set during each start up.
The automatically pop up of this window can be disabled by deactivatig the
checkbox "Restart Settime during next startup". In this case date and time
get random values.
If the other checkbox 'Set the default time during startup' is activated, the
KeTop uses default values. (date and time when the image was ceated.)
In both cases the settings must be saved in the registry.
("Start -> Programs -> KeTop -> Registry Backup").