manualshive.com logo in svg

Keba KeTop T50VGA, User Manual, Page: 21 / 165

Share
Download
Keba KeTop T50VGA User Manual Download Page 21

Handheld Terminal 

Connection 

User's Manual, Version: 1.3 

21 

© KEBA 2007 

 

4.2  Cable Routing in Cable Entrance Area 

After opening the cable entrance area, the connecting lines can be routed 
as described in the following chapters. Before opening the KeTop please 
pay attention to the following safety instructions: 
 

Instructions for opening the cable entrance area: 

•

 

Lay the KeTop with the display facing down onto a plane and clean ta-
ble (preferable on ESD pad) and take care not to damage the KeTop 
and its operating elements. 

•

 

For opening and closing the cable entrance area use the following type 
of screwdriver: „Phillips size 2“. 

 
Instructions for modifications in the cable entrance area: 

•

 

Unplug the main connector (S22) by pulling on its wires with your fin-
gers. Do not use any sharp objects. 

•

 

For unplugging the RJ-45 jack (S11or S4), actuate the locking lever: 

S19

S19

S4 / S6

1

2

S22

S22

S4 / S11

 

 
Make sure that the connectors S22 and S4 / S11 correctly snap in when 
you plug them in. Otherwise the emergency stop functionality (S22) or the 
correct shielding (S4 / S11) might not be given any more. 
 

Instructions for closing the cable entrance area: Make sure that 

•

 

the sealing is clean, not damaged and correctly positioned in the cable 
entrance area, 

•

 

no cables are squeezed in, 

•

 

the cover of the cable entrance area is attached again with all 6 screws 
(torque: 0.4 bis 0.5 Nm). Otherwise the protection degree cannot be 
guaranteed. 

 

Information: 
The position of connectors S11 (RS-422-A / RS-232-C) and S4 (Ethernet) 
in KeTop T50VGA is just the other way round like in KeTop T100. 
Users of both devices please take care for this! 

 

Summary of Contents for KeTop T50VGA






































































































































































Reviews:

No comments