Keba KeTop T50VGA User Manual Download Page 18

Page: 18 / 165

General product discription

KeTop T50VGA

User's Manual, Version: 1.3

3.2 Ergonomic Features

Multigrip handle

Round housing

Different holding positions

Operation by right-handed and left-handed people

Desk top operation

Operation in wall bracket

The cable outlet can be on the left or right side of the housing.

Easy-to-read display

3.3 Housing

Vibration- and shock resistance

Housing made of non-flammable material (UL 94-V0), impact-resistant,
withstands water, cleaning agents (alcohol and tensides), oil, drilling
oils, grease and lubricants

Double-walled, extremely sturdy ABS housing. Drop-tested on industrial
flooring from a height of 1.5 m (59.1 in).

3.4 Operating and Display Panel

Membrane keys with tactile feedback

4 status LEDs (max. 12; 4 on each keypad)

Buzzer optional

Resistive touch screen, to be operated with finger or stylus

Backlit color LC display
6.5“ TFT (640x480 pixels)

Summary of Contents for KeTop T50VGA






































































































































































Search results

Summary of Contents for KeTop T50VGA

Reviews:

Keba KeTop T50VGA, User Manual, Page: 18 / 165

Search results

Summary of Contents for KeTop T50VGA

Reviews: