manualshive.com logo in svg

Keba KeTop T50VGA, User Manual, Page: 104 / 165

Share
Download
Keba KeTop T50VGA User Manual Download Page 104

Options KeTop 

T50VGA 

104 

User's Manual, Version: 1.3  

 

© KEBA 2007 

9.3 Illuminated Push-Button 

If available, the illuminated push-buttons in the KeTop are evaluated by the 
software and can be read via the KeTop-API (see page 47) using a pro-
gram. 
 
The illuminated push-buttons are available as „momentary“ type or as 
„maintaining“ type. 

9.4 Key Switch 

If available, the key switch is evaluated by the software in the KeTop and 
can be read via the KeTop-API using a program. 
 
The key switch is available with 3 positions. 
 

9.5 Joystick 

If available, the 3-axis joystick in the KeTop is evaluated by the software 
and can be read via the KeTop-API using a program. 
To avoid that the joystick is damaged when the device falls to ground, a 
short joystick is used. The joystick enables moving robot axes for example. 

z

 

Value range: 

-15 to +15 per axis (31 increments) 

 

Summary of Contents for KeTop T50VGA






































































































































































Reviews:

No comments