9
Options
This chapter describes the options the KeTop is available with.
9.1
Override Potentiometer
If available, the override potentiometer in the KeTop is evaluated by the soft-
ware and can be read via the KeTop-API using a program.
The override potentiometer can be used for example for setting the number of
spindle revolutions and the forward feed on machine tools.
●
Resolution: 0 - 27, linear
9.2
Electronic Handwheel
If available, the electronic handwheel in the KeTop is evaluated by the software
and can be read via the KeTop-API using a program.
50 pulses are counted per revolution. Turning the handwheel clockwise incre-
ments the count, turning the handwheel counter-clockwise decrements the
count (0-65535, 16-bit value).
Main features
●
50 lock-in positions / revolution
●
1 pulse / lock-in position
Information
If the KeTop falls to ground, control the position of the handwheel knob. If
necessary press down the knob until it snaps in.
9.3
Illuminated Push-Button
If available, the illuminated push-buttons in the KeTop are evaluated by the
software and can be read via the KeTop-API using a program.
The illuminated push-buttons are available as "momentary" type or as "main-
taining" type.
9.4
Key Switch
If available, the key switch is evaluated by the software in the KeTop and can
be read via the KeTop-API using a program.
The key switch is available with 3 positions.
Options
© KEBA 2009
User's Manual V1.50
97
Summary of Contents for KeTop T100
Page 1: ...KEMRO KeTop T50VGA User s Manual V1 50 Translation of the original instructions ...
Page 4: ......
Page 10: ......