manualshive.com logo in svg

Keba KeTop T100, User Manual, Page: 35 / 163

Share
Download
Keba KeTop T100 User Manual Download Page 35

4.8.1 

Wiring diagram

Fig.4-10:

Connection of KeTop T50VGA with RS-422-A via connection box KeTop CB211

4.8.2 

General information about the RS-422-A interface

●

The A terminal of the generator shall be negative with respect to the B
terminal for a binary 1 (MARK or OFF) state.

●

The A terminal of the generator shall be positive with respect to the B ter-
minal for a binary 0 (SPACE or ON) state.

To identify the lines, the voltage between the lines A and B can be measured
by means of a voltameter.

4.9 

RS-232-C

The serial interface can be used as RS-232-C or as RS-422-A interface (se-
lection by Dip switches). The communication takes place via the COM-SIO
connector S11 in the cable entrance area of the KeTop.

Information

The simultaneous use of the Ethernet interface and the COM interface
(RS-422-A or RS-232-C) is only possible with an appropriate cable

The RS-232-C interface assigned to the COM 5 interface port is in the software.
The interface parameters are set via the WIN32API in the Windows operating
system.

Connection

© KEBA 2009

User's Manual V1.50

35

Summary of Contents for KeTop T100




































































































































































Reviews:

No comments