background image

Safety notes

2.1 

Representation

At various points in this manual you will see notes and precautionary warnings
regarding possible hazards. The symbols used have the following meaning:

DANGER!

indicates an imminently hazardous situation which will result in death or
serious bodily injury if the corresponding precautions are not taken.

WARNING!

indicates a potentially hazardous situation which can result in death or se-
rious bodily injury if the corresponding precautions are not taken.

CAUTION!

means that if the corresponding safety measures are not taken, a potentially
hazardous situation can occur that may result in property injury or slight
bodily injury.

CAUTION

CAUTION used without the safety alert symbol indicates a potentially haz-
ardous situation which, if not avoided, may result in damage to property.

This symbol reminds you of the possible consequences of touching elec-
trostatically sensitive components.

Information

Useful practical tips and information on the use of equipment are identified
by the “Information” symbol. They do not contain any information that warns
about potentially dangerous or harmful functions.

2.2 

General safety instructions

WARNING!

It is absolutely essential to observe the safety instructions in the system
manual.

The module is defined as "open type equipment" (UL508) or as "offenes
Betriebsmittel" (EN 61131-2) and must therefore be installed in a control
cabinet.

TM 225/A

Safety notes

© KEBA 2011

Project engineering manual V1.06

9

Summary of Contents for Kemro TM 225/A

























Reviews: