3
Operating panel description
The operating panel is designed for operating and visualization tasks and for
the operation on a KeControl PLC (CP).
The control can be connected to maximally one operating panel. The connec-
tion to the control occurs via the graphic interface (graphics) of the operating
panel.
The operating panel consists of a housing with graphic display ready for in-
stallation, a front plate and has the following equipment:
Key features
●
48 membrane keys, some with LEDs and labeling strips
●
16 inputs (not EN 61131-2 conform), for the connection of external switch-
ing elements such as toggle switches etc.
●
5 pieces 22.5 mm openings for the installation of operating and signaling
elements in the front plate
●
Graphics interface (graphics) for the control with LVDS (
L
ow
V
oltage
D
ifferential
S
ignaling): Up to 10 m transmission range of the operating
panel from the control.
●
Display: 12.1“ TFT, 256,000 colors
●
Touchscreen
The visualization on the control is realized by kemro.view.standard (no visu-
alization runtime system on the operating panel required).
3.1
Operating panel enhancements
The range of functions of an operating panel can be enhanced with the KEBA
components listed below. Separate manuals are available for these compo-
nents.
Please observe the application area and the safety notes for these prod-
ucts in the separately available manuals.
Input/Output modules XE 040/A and XE 040/B
These modules make additional digital inputs/outputs available (not according
to EN 61131-2). The connection to an operating panel is via a serial RS-485-
A interface (SI0).
XE 040/A
XE 040/B
●
24 digital inputs
●
8 digital outputs
●
16 digital inputs
●
16 digital outputs
Operating panel description
OP 350/C-1100
© KEBA 2009
Project engineering manual V2.00
12
Summary of Contents for Kemro OP 350/C-1100
Page 4: ......