CP 503/A, CP 505/A,D,K, CP 507/
A,C
Mounting and installation instructions
Project engineering manual V1.06
37
© KEBA 2021
5.7.5
Removing expansion modules
To remove expansion modules, proceed as follows:
1) Disconnect the power supply.
2) Remove the end bracket.
3) Release the lock on the right side of the expansion module to be re-
moved by pushing it up.
Fig. 5-24: Releasing the lock
4) Slide the expansion module to the left until the recesses have disen-
gaged from the hooks of the module to the right.
Fig. 5-25: Removing an expansion module
5) To dismantle the expansion module from the mounting rail, release the
