P30
Frequently asked questions (FAQ)
FAQ V1.01
20
© KEBA
Illustration 2-4: Local charging network with connection to OCPP backend
1
... Local charging network
2
... Router/Switch
3
... Master charging station (P30 x-se-
ries)
4
... Slave charging station (P20/P30 c-
series)
5
... Internet
6
... OCPP backend
Can I operate a local charging network?
Yes, with a P30 x-series, you can locally control up to 15 charging stations of
the type P20 c-series or P30 c-series. For details, refer to the "P30 x-series
Configuration Manual".
Is an external charging network possible?
Yes, an external charging network can be realized via UDP and/or OCPP.
How do I know if the charging station is connected to the OCPP backend?
On the master charging station, all 4 segments of the LED bar flash blue.
The requirement is that the DIP switch 2.5 has been set to ON.
When do 3 or 4 segments of the LED bar flash?
3 segments of the LED bar are flashing: Master and slave are ready for op-
eration but not connected to the OCPP backend.
4 segments of the LED bar are flashing: Master and slave are ready for op-
eration and connected to the OCPP backend.
The requirement is that the DIP switch 2.5 has been set to ON.
