Keba KeContact P30 x-series, Configuration Manual

Page: 45 / 76

P30 x-series Introduction
Configuration manual V4.02
7
© KEBA
1.2 Purpose of the document
This document describes the configuration of the advanced features of the
P30 x-series charging station after it has been installed. This includes,
among other things, the description of the settings in the web interface.
This document is an extension to the supplied manuals of the P30 x-series
charging station.
You must comply with all instructions and safety instructions in the
supplied manuals!
1.3 Requirements
This document contains information for persons with the following require-
ments:
Target group Required knowledge and abilities
Elektrofachkraft
Person who, due to his or her special training, expertise and experi-
ence as well as knowledge of current standards, is able to assess
the work performed and the possible hazards.
Knowledge of:
● current valid safety information,
● the mode of operation of the charging station,
● the displays and operating elements of the charging station,
● basics of network technology,
● basics of IT,
● diagnostic options,
● systematic fault analysis and rectification,
● the setting options on the charging station.
1.4 Guarantee
Only the maintenance work expressly permitted by KEBA may be performed.
Any other manipulations to the device will also result in loss of warranty.
WARNING!
Danger due to electric shock and fire hazard!
After opening the front part, product safety can no longer be guaranteed.