Keba KeContact P30 x series, Configuration Manual

Page: 45 / 68

Local load management
45/68
4.1 Further network versions
Local DHCP server
Note
These network versions require an enabled local DHCP server in the MASTER charging station.
This feature is disabled in the delivery state.
Create a configuration file and enable the local DHCP server with the new configuration file.
Subsequently, a PC can be connected directly to the MASTER charging station via LAN. The web inter-
face can be accessed via the IP address
192.168.42.1 for the further configuration.
Parameter of the configuration file:
[NETWORK]
LocalDHCPServerEnabled=true
Connection via a switch
The connection to the OCPP host is carried out via the GSM module of the MASTER charging station.
1 ... KeContact P30 x-series (Master) 2 ... KeContact P30 c-series (Slave)
3 ... KeContact P20 c-series (Slave)
en