KC-S10
Safety notes
V
8
© KEBA 2022
2
Safety notes
WARNING!
Risk of electric shock and fire hazard!
●
Installation, commissioning, maintenance or retrofitting of the device
must be performed by correctly trained, qualified and authorized electri-
cians
1)
who are fully responsible for the compliance with existing stan-
dards and installation regulations.
Please observe that national regulations may be required.
Also note that some countries may require a different triggering charac-
teristic of the residual current circuit breaker (Type B).
●
Do not install or use a damaged device.
●
A damaged device must be taken out of commission and repaired or re-
placed by a qualified and authorized electrician.
●
Repair of the device is not permitted and may only be carried out by the
manufacturer.
●
No unauthorized conversion work or modifications may be made.
●
No markings (such as safety signs, warnings, wire markings, etc.) may
be removed.
1)
Persons who, due to their special training, expertise and experience as
well as knowledge of current standards, are able to assess the work per-
formed and the possible hazards.
Caution
Possible damage to property!
●
When connecting and wiring the device, ensure that the connection area
is clean so that no foreign objects (pieces of wire, etc.) get inside.
●
Never clean the device with aggressive solvents and cleaning agents,
abrasive materials, spray water (garden hose, high-pressure cleaner,
etc.) or excessive pressure.