E10 Smart Energy Meter
Recommendations
V1.01
5
© KEBA 2023
2
Recommendations
It is recommended that the KeContact E10 gets a
fixed IP address
(IP-bind-
ing) via the DHCP server (router, WLAN modem,…) of your local network.
Access your DHCP server and set a fixed IP address for the KeContact E10.
To do this, please refer to the manual of your router.
You may need the MAC-address of the KeContact E10 that is printed on its
type plate.
Information
The IP-binding feature is not supported by the DHCP server of a P30 x-se-
ries charging station. In this case please follow the instructions in the fol-
lowing chapters.
