Keba D3DP 3 Series, Project Engineering Manual, Page: 65 / 82

D3­DP 3xx/x Technical data
Project engineering manual V1.00
65
© KEBA
12 Technical data
12.1 Ambient conditions
According to EN 61800­1 and the included and referenced environment clas­
sifying of standards IEC 60421­3.
Operation:
according to EN 61800­2, IEC 60721­3­3
class 3K3
● Temperature: 5 °C to +40 °C
● Relative humidity of air: 5 to 85 %
1)
Storage:
according to EN 61800­2, IEC 60721­3­1
class 1K3 and 1K4
● Temperature: ­25 °C to +55 °C
● Relative humidity of air: 5 to 95%
2)
Transit:
according to EN 61800­2, IEC 60721­3­2
class 2K3
● Temperature: ­25 °C to +70 °C
● Relative humidity of air: 95% with max. +40 °C
3)
Vibration resistance: according to EN 61800­2
Shock resistance: according to EN 61800­2
Protection class: IP20 (all connection terminals IP00)
Contamination level: 2
1)
The absolute humidity is limited to max. 25 g/m³. That means that the max­
imum values for temperature and relative humidity stipulated in the table
must not occur simultaneously.
2)
The absolute humidity is limited to max. 29 g/m³. So the maximum values
for temperature and relative humidity stipulated in the table must not occur
simultaneously.
3)
The absolute humidity is limited to max. 60 g/m³. This means, at 70 °C for
example, that the relative humidity may only be max. 40 %.
Caution
The climatic conditions apply to the device. For this reason they must also
be met in the cabinet.
Caution
The devices must not be installed in areas where they are exposed to con­
tinuous vibration.