D3-DA 3xx/x
Displays and operating elements
Project engineering manual V1.07
25
© KEBA
4
Displays and operating elements
4.1
Status LEDs of the axis
Depending on the design of the axis module (single-axis module, double-
axis module, triple-axis module) up to 3 times 3 LEDs are provided as status
indicators. The LEDs are on the front of the device and are assigned to axis
1 to axis 3 from top to bottom. The significance of the LEDs is the same for
each axis and is as follows:
Fig. 4-6: Status LEDs
Axis 1(2,3)
... Indication of which axis is
accessed via the display on
the control module assembly
ERR
... Error indication using flash-
ing code
RUN
... Ready / power stage active
4.2
EtherCAT LEDs (RJ45)
At the EtherCAT connectors are the following LEDs.
Fig. 4-7: EtherCAT connections (X40A / X40B)
1
... Link/Acitivty LED
2
... RUN LED
3
... ERR LED
Link/Activity LED
Indication
Meaning
Dark
No connection
Green flashing
Transmission of data
