D3-DA 3xx/x
Appendix: Further components
Project engineering manual V1.07
113
© KEBA
16.1.3
Cooling plate D3-XM 300-080
Fig. 16-54: Dimensions of cooling plate D3-XM 300-080, dimensions in mm
1
... all thread M4 passage
16.2
Accessories
The KeDrive system was supplemented with the following accessories:
●
DMS2 synchronous servomotors, with:
●
Encoders of type Hiperface, Hiperface DSL and Resolver
●
Pre-assembled motor cable
●
Pre-assembled encoder cable
●
Data cables - for fieldbus and communication with supply module
●
Connector sets, PE-connection plate
●
PC-usersoftware - e.g. KeStudioDriveManager
●
Mains filter - reduces conducted high frequency interference of the D3-
DA 3xx/x axis module (For use on the D3-DP 3xx/x supply module)
●
Mains choke - reduces the voltage distortions (THD) in the system and
prolongs the life of the D3-DA 3xx/x axis module (for use on the D3-DP
3xx/x supply module)
●
Brake resistor - converts surplus regenerated energy into heat and in
this way permits an even more dynamic movement process (for usage
on theD3-DP 3xx/x supply module).
