Keba CDF3000, Operation Manual

Page: 83 / 94

5-5
Operating Instructions CDF3000
5 Troubleshooting
5.5 Reset The reset function is divided into two areas with differing effects. Parame-
ter reset restores to the last value stored in the device. Device reset
restores the entire dataset to factory setting (delivery defaults).
Parameter reset with K
EY
P
AD
If you are in the setup mode of a parameter and press the two cursor keys
simultaneously, the parameter you are currently editing will be reset to
the last setting saved (= saved with parameter 150-SAVE).
Factory setting with K
EY
P
AD
Press both cursor keys simultaneously during positioning controller
power-up to reset all parameters to their factory defaults and reinitialise
the system
Factory setting with
D
RIVE
M
ANAGER
In the "Active device" menu, the "Reset to factory setting" option can be
used to restore the delivery defaults of the device.
Note:
Attention! This factory setting also resets the selected default
solution. Check the terminal assignment and the functionality
of the positioning controller in these operating modes or load
your user dataset.