1-2
Operating Instructions CDF3000
1 Safety
Pictograms used
The notes on safety describe the following danger classes.
The danger class describes the risk which may arise when not complying
with the note on safety.
Your qualification:
• In order to prevent personal injury or damage to prop-
erty, only personnel with electrical engineering qualifica-
tions may work on the device.
• The qualified personnel must familiarise themselves with
the Operation Manual (refer to IEC364, DIN VDE0100).
• Knowledge of the national accident prevention regula-
tions (e. g. VBG 4 in Germany)
During installation follow these instructions:
• Always comply with the connection conditions and tech-
nical specifications.
• Comply with the standards for electrical installations,
such as wire cross-section, earthing lead and ground
connections .
• Do not touch electronic components and contacts (elec-
trostatic discharge may destroy components).
Warning
symbols
General explanation
Danger class acc. to ANSI Z 535
Attention!
Operating errors may cause damage to
or malfunction of the drive.
This may result in physical
injury or damage to material.
Danger, high voltage!
Improper behaviour may
cause fatal accident.
Danger to life or severe physical
injury.
Danger from rotating parts!
The drive may auto-
matically start.
In particular, on the usage of the "automatic restart"
(Autostart) function it is to be ensured that a hazard
is not produced.
Danger to life or severe physical
injury.
Summary of Contents for CDF3000
