KEB COMBIVERT H6 Series, Instructions For Use Manual, Page: 64 / 82

4.5 Safety modules terminal block X2b (not for charging module)
4.5.1 Module type 0 terminal block X2b
Module type 0 is used for switching the control release and brake control release if no
safety requirements are made.
Pin Name Description
4 BR - no function -
3 0V Mass
2 24V 24V output (
I
N
= 100 mA)
1 ST Control release
Assembly and cable cross-sections see section „Assembly of the wires to PUSH IN termi -
nals“ .
Figure 41: Safety module type 0 terminal block X2B (top view)
The digital inputs are specified in accordance with IEC61131-2 type 3.
Status „0“ Status „1“
-3…5V 11…30 V
4.5.2 Control release
The driver modules of the power modules are supplied with voltage by switching the
control release.
X2B.2 (24V)
X2B.1(ST)
X2B.2 (24V)
X2B.3 (0V)
X2B.1(ST)
+
SPS
Figure 42: Connection of the control release via switch and PLC
64
SAFETy MODULES TERMINAL bLOCk X2b (NOT FOR CHARGING MODULE)