Glossary
KEB Automation KG
38
ma_dr_f6-cu-a-inst-20118593_en
Glossary
Application
The application is the intended use of the KEB
product.
Basic insulation
Protection against contact with electrical voltage.
BiSS
Open source real-time interface for sensors and
actuators
CAN®
Serial bus system running protocols such as CAN-
open, Devicenet or J1939. CAN is a registered
trademark of the CAN in AUTOMATION - Interna-
tional Users and Manufactures Group e.V.
COMBIVERT
Proper name for a KEB Drive Controller
COMBIVIS
KEB start-up and parameterizing software
Customer
The customer has purchased a product from KEB
and integrates the KEB product into his product
(customer product) or resells the KEB product (re-
seller).
DIN 66019
Information processing; control method with the 7-
bit code during data transmission.
DIN EN 61131-2
Programmable controllers - Part 2: Equipment re-
quirements and tests
Directive 2006/42/EC
Machinery Directive
Directive 2014/30/EU
Electromagnetic Compatibility (EMC) Directive
EN 60204-1
Safety of machinery - Electrical equipment of ma-
chines - Part 1: General requirements (VDE
0113-1, IEC 44/709/CDV).
EN 61800-5-1
Adjustable speed electrical power drive systems.
Part 5-1: Safety requirements - Electrical, thermal
and energy requirements (VDE 0160-105-1, IEC
61800-5-1)
EnDat
Bidirectional encoder interface of the company
Heidenhain
HCT
Component for current measurement in the power
circuit.
Hiperface
Bidirectional encoder interface of the company
Sick-Stegmann
HSP5
Fast, serial protocol
HTL
Incremental signal with an output voltage (up to
30V) -> TTL
PELV
Safe protective extra-low voltage (earthed).
RS485
RS-485 is an industry standard according to
EIA-485 for a physical interface for asynchronous,
serial data transmission.
Safety over EtherCAT®
Safety over EtherCAT® is a registered trademark
and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
SAR
Safe acceleration range; as SLA, but with upper
and lower limit with the same sign.
