29
MOUNTING
4.2.2 Example 1: Brake without hub (e.g. 01…12-02-110xxxx)
1.1
2.2
1
.
6
3
6
2.1
4
X
Figure 10: Example 1: Brake without hub (e.g. 01…12-02-110xxxx)
►
The shaft of the motor and the mounting surface (3, 6) must be constructed by way, that during mounting
the air gap X occurs automatically.
►
If necessary, the air gap X can be adjusted with adjusting washers between armature element (6.1) and
shaft.
►
Mount the magnet (1.1) with the socket head screws (2.1) to the mounting surface (3).
►
Place the armature element (6.1) against the screw mounting surface on the customer side (6) and tighten
the socket head screws (2.2) lightly with the Schnorr lock washers (4).
►
Align the armature element and tighten the socket head screws.
►
Mount the component (6).
►
Secure the component (6) axially.
►
Check the air gap X. Adjust it, if necessary.