GB - 14
Powerlink Operator
Bit0 : = 1: Switches automatically into the synchronous-mode, if the Powerlink
(FPGA) changes into state operational.
= 0 : No activation of the synchronous-mode possible.
Default value:
0000h
Notice:
A new value takes effect immediately and is stored non-volatile.
Name:
PD_In_Cycle (Fb16)
Meaning:
Displays the cycle time the PDIN data are read by the FI, in order to transmit the data to
Powerlink.
This parameter adjustment has no effect in the synchronous mode. In synchronnous
mode the PDIN data are read once by the FI with each SoC cycle.
Combivis-
Parameter address:
0290h
SDO-Index:
2290h
SDO-Subindex:
0
Data length:
2 Byte
Access:
READ_WRITE
Coding:
1 ms
Default value:
25 ms
Notice:
A new value takes effect immediately and is stored non-volatile.
Name:
PD_Inx_Map with x = 1-4 (Fb17-Fb20)
Meaning:
Defines the xth mapping for PDIN-data.
Combivis-
Parameter address:
0291h-0294h
SDO-Index:
2291h-2294h
SDO-Subindex:
0
Data length:
4 Byte
Access:
READ_WRITE
Coding:
Mapping according to [2]
b31 b24
b23 b16 b15 b8 b7 b0
Index
Subindex
Bitlen
Default value:
Parameter-Name
Value
Mapped parameter
PD_In1_Map
202C0120h
SY.44: Status word (long)
PD_In2_Map
20350110h
SY.53: Actual speed
PD_In3_Map
2E160110h
IN.22: User Parameter 1
PD_In4_Map
20350110h
SY.53: Actual speed
Notice:
A changed value leads to the automatic deactivation of the PDIN-operation by resetting
the parameter Nr_PDIN_Objs = 0.
Name:
Nr_PDIN_Objs (Fb21)
Meaning:
Displays the number of the mapped objects of the PDIN data.
Combivis-
Parameter address:
0295h
SDO-Index:
2295h
SDO-Subindex:
0
Data length:
1 Byte
Access:
READ_WRITE
Coding:
1
Default value:
3
Notice:
If the values of mapping parameters (Fb17-Fb20) are changed, the value of Nr_
Summary of Contents for COMBICOM
Page 1: ...COMBICOM Mat No Rev CL F5 0E0 K100 1A GB Instruction Manual Powerlink V1 0...
Page 2: ......
Page 4: ...GB 4...
Page 23: ...GB 23 Notes...
