KEB 7608000-4001, Instructions For Use Manual

Page: 34 / 50

3.5.2 Shaft end for servo motor 7607613-40xx
The motor has a toothed shaft according to DIN 5480-45x2x21x9g. Use suitable devices
for mounting and pulling off driving elements. Support the device at the D(AS) shaft end.
Use suitable tool!
Do not expose the motor to any impacts or blows.
*1
SPLINE DIN 5480 - 45x2x21x9g
60
5
55
44.6 g9
-0.009 -0.071
(
)
300 f7
-0.056 -0.108
(
)
400
17.5
(Motor)
*1 corrosion protection 100µm (Tectyl-506 EH)
Figure 8: Shaft end of the servo motor 7606910-40xx
34
TECHNICAL DATA