KE LOGEM LGH 28.8D1, Operation Manual, Page: 173 / 200

173 Operation Manual V.34 - Modems, Version 07/97
Chapter 8
Appendix
F255 E1 L1 Q0 X4 V1 P \Q2 \G0 \A1 \C3 \L0 \N3 \X0 \K3 \B3 %C1 %E1
%M0 %R0 &L0 &I0 &X0 &G0 &M0 &C2 &D0 &H0 &R1 &S1 &T5
S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S07=100
S08=002 S10=050 S12=045 S20=255 S26=004 S28=000 S37=000
S39=017 S40=019 S45=001 S50=255 S51=255 S54=001 S60=000
S61=000 S62=030 S63=006 S64=001 S65=004 S66=016 S67=000
S80=000 S81=000 S90=005 S91=001 S100=042 S101=000
S102=000
In delivery state the basic setting 8 is identical to basic setting 0, as an
addition remote configuration (register S45=1) is possible as well. The
modem is operational without the control line S1(108). The command
AT&W2 overwrites these values and allows for defining of an individual
basic setting.
Switches S2.6 S2.7 S2.8 S2.9 S2.10
S3.2 S3.3 S3.4 S3.5 S3.6
OFF OFF OFF OFF OFF
Basic Setting 8 = User Setting 2
automatical detection of modulation procedure, V.42bis, btx-
operation possible with transmission ranges < 2400 bit/s, AT
commands, autobaud, asynchronous