KE LOGEM 928, Operation Manual

Page: 57 / 200

57
Operation Manual V.34- Modems, Version 07/97
ON
Chapter 2
Switches Description
F255 E1 L1 Q0 X4 V1 P \Q2 \G0 \A1 \C3 \L0 \N3 \X0 \K3 \B3 %C1 %E1
%M0 %R0 &L0 &I0 &X0 &G0 &M0 &C2 &D0 &H0 &R1 &S1&T5
S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S07=100
S08=002 S10=050 S12=045 S20=255 S26=004 S28=000 S37=000
S39=017 S40=019 S45=001 S50=255 S51=255 S54=001 S60=000
S61=000 S62=030 S63=006 S64=001 S65=004 S66=016 S67=000
S80=000 S81=000 S90=005 S91=001 S100=042 S101=000 S102=000
In delivery state the basic setting 8 is identical to basic setting 0. As an
addition remote configuration is possible (register S45=1) and the modem
is operational without the control line S1(108). Using the command AT&W2
these values can be overwritten to generate an individual basic setting.
2.4.2 Switches Table Basic Setting 8 (User Setting 2)
Switches S2.6 S2.7 S2.8 S2.9 S2.10
S3.2 S3.3 S3.4 S3.5 S3.6
OFF OFF OFF OFF OFF
autom. detection of modulation procedure, V.42bis, btx operation with
transmission rates > 2400 bit/s possible, AT commands, autobaud,
asynchronous