KE LOGEM 928, Operation Manual

Page: 56 / 200

56
Operation Manual V.34- Modems, Version 07/97
ON
Chapter 2
Switches Description
F3 E1 L1 M1 Q0 X4 V1 P \Q2 \G0 \A1 \C0 \L0 \N1 \X0 \K0 \B3 %C1 %E1
%M0 %R0 &L0 &I0 &X0 &G0 &M0 &C2 &D2 &R1 &H0 &S0 &T5
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S07=100
S08=002 S10=004 S12=045 S20=255 S26=004 S28=000 S37=000
S39=017 S40=019 S45=000 S50=003 S51=004 S54=001 S60=000
S61=000 S62=030 S63=006 S64=001 S65=004 S66=016 S67=000
S80=000 S81=000 S90=005 S91=001 S100=042 S101=000
S102=000
This basic setting allows for btx operation of the modems with 2400 bit/
s. The data protection protocols are deactivated and the modem operates
in direct mode. During command phase the modems operate with AT
commands.
2.4.1 Switches Table Basic Setting 1
Switches S2.6 S2.7 S2.8 S2.9 S2.10
S3.2 S3.3 S3.4 S3.5 S3.6
OFF OFF OFF OFF OFF
V.22bis, btx, AT commands, 2400 bit/s, asynchronous