KE LOGEM 928, Operation Manual

Page: 40 / 200

40
Operation Manual V.34- Modems, Version 07/97
ON
Chapter 2
2.1.2 LGM 2400D2 Operation
S1.1 transmission procedure
S1.1
OFF
asynchronous
ON synchronous
S1.2 S1.3 format V.25bis sync. S1.2 S1.3 data format. asyn.
S1.2 S1.3 S1.2 S1.3
OFF OFF bitoriented ASCII OFF OFF 10 bit/character
ON OFF byteoriented ASCII ON OFF 9 bit/character
OFF ON bitoriented EBCDIC OFF ON 8 bit/character
ON ON byteoriented EDCDIC ON ON 11 bit/character
S1.4 S1.5 S1.6 operation mode
S1.4 S1.5 S1.6
OFF OFF OFF S1.2 operation (outg. autom. dialing, inc. autom.
switching with answer tone)
ON OFF OFF S1.2 operation (outg. manual dialing, inc. autom.
switching with answer tone)
OFF ON OFF leased line (M1 + direct switching)
ON ON OFF direct call (outg. dir. dialing via interface S1/DTR)
OFF OFF ON S1.2 operation (outg. autom. dialing. inc. manual
switching with answer tone)
ON OFF ON S1.2 operation (outg. manual dialing, inc. manual
switching with answer tone)
OFF ON ON S1.2 operation (outg. manual dialing, inc. manual
switching with answer tone)
ON ON ON S1.1 operation, leased line via S1/DTR
S1.7 S1.8 clock source at synchr. operation
S1.7 S1.8
OFF OFF transm. clock int. (T2, 114)
ON OFF transm. clock from receive clock (T4, 114)
OFF ON transm. clock ext. (T1, 113), (ignored at ISDN op.)
ON ON idle
S1.9 S1.10 transmission rate *
S1.9 S1.10
OFF OFF via interface line S4/114
ON OFF 2400 bit/s, permanently set
OFF ON 1200 bit/s, permanently set
ON ON idle
Switches Description