KE LOGEM 928, Operation Manual

Page: 28 / 200

28 Operation Manual V.34 - Modems, Version 07/97
Chapter 1
S1 M2 D1 M5 D2 A/O Da/Te
LOGEM ®
928
1.21 Installation and Commissioning (Top Rail Versions)
The items listed below are necessary for commissioning of the LOGEM ®
LGH 28.8D1:
• a telephone access
• a telephone access jack TAE 6, coding N
• a data terminal equipment (PC, terminal, ...)
Proceed the installation step by step following the information listed below:
1. Deactivate your DTE and all other peripheral equipment (printer, etc.).
2. Set the DIP switches at your device as necessary.
3. Connect the V.24 interface cable to the serial output of your DTE
(V.24/V.28 orRS 232C) and the 25pole jack of your modem.
4. Connect the telephone access cable with the modem and the TAE6 N
jack.
5. Now connect your modem with the 24 V DC operating voltage.
The LGH 28.8D1 performs a self test.
Attention!
The LGH 28.8D1 may only be operated with a power supply that
corresponds to EN 60950.
6. Now activate your DTE and all other peripheral equipment.
7. Install and/or activate your data communication software.
Modem Description