KE LOGEM 928, Operation Manual

Page: 107 / 200

107
Operation Manual V.34 - Modems, Version 07/97
REG
Chapter 4
Register Description
4.2 Register Description
The modems feature a number of registers to store information and to
manipulate the operation of the modem.
To adapt the modem to individual applications you can change the default
parameters using the command ATS(n)=xxx.
With the command AT&W(n) register values may be saved permanently
in the EEPROM. Data stored in the EEPROM are not erased even after
deactivation of the power supply.
The values stored here are read out automatically from the modem
EEPROM to the working storage of the modem after typing the command
ATZ(n) or switching the device on.
The 8 basic settings are stored in a read only memory (ROM). They are
not erased even after alteration of the data stored in the EEPROM. The
factory default can be recalled by typing the command AT&F(n).
To define a modem setting after POWER ON you can select a user setting
with the command AT&Y(n) (n = 0...2).
Attention! Registers not documented here must not be altered.
Any changes might cause malfunctions of your modem.