- 17 -
Warnings
●
When the “ERROR” lamp illuminates, you cannot use the unit. Repair it according to provided solutions.
※
If there is no improvement, contact our support team.
Cause: The optional chiller is abnormal.
Cause: Water is leaking in the unit.
No.00
No.01
Solution: Check the connection of outlet and signal
Solution: Stop using the unit immediately. Contact
terminals.
our support team for repair.
Cause: Water is leaking in the optional chiller.
Cause: Chiller water is below required amount.
No.02
No.03
Solution: Stop using the optional chiller. Contact our
Solution: Check the amount of the chiller water and
support team for repair.
add coolant or water if necessary.
The poor connection of the signal terminals may
The poor connection of the signal terminals may
※
※
cause this warning.
cause this warning.
Cause: Chiller water is not flowing.
Cause: The muffle chamber does not invert to the
No.04
No.05
casting position.
Solution: Check the bend of piping of optional chiller
Solution: Check if any objects interfere with
or tap water or the flowing of tap water.
inverting the chamber.
The poor connection of the signal terminals may
※
cause this warning.
Cause: The muffle chamber does not invert to the
Cause: The overcurrent of high frequency power.
No.06
No.10
melting position.
Solution: Check if any objects interfere with
Solution: The noise may occur this warning. If this
inverting the chamber.
warning is often displayed, contact our support team
for repair.
Cause: The protective circuit of high frequency
Cause: High frequency is not output.
No.11
No.12
power is operated.
Solution: The noise may occur this warning. If this
Solution: High frequency power may malfunction.
warning is often displayed, contact our support team
Contact our support team.
for repair.
Cause: It cannot measure power frequency.
Cause: The power supply voltage is out of range.
No.14
No.15
Solution: High frequency power may malfunction.
Solution: The unit can work with single-phase,
Contact our support team.
220-240V and 20A. Check the power supply voltage
and allowable current.
Cause: The memory data is damaged.
Cause: The control board is abnormal.
No.16
No.17
No.21
Solution: The noise may cause data damage or
Solution: If this warning is often displayed, contact
change memory. Check the memory.
our support team for repair.
Cause: The high frequency power board is
No.18
abnormal.
Solution: If this warning is often displayed, contact
our support team for repair.