SETUP GUIDE
Interface
•
This tablet must be set up by an adult to ensure an appropriate level of protection for
all users of the device.
•
To turn off your Kurio
®
tablet correctly, press the power button until the pop up message
appears on screen, and then select "Power off". Avoid switching off the device by pressing
and holding the power button until the unit stops.
•
Password reset: Tech support may not be able to retrieve your parental area password, so
please don't forget to note it in a safe place. In case of a lost password, the tablet may have to
be factory reset and all personal data will be lost.
•
Please connect your Kurio
®
tablet to wifi frequently to receive and enjoy the latest upgrades.
Updates are pushed to your tablet wirelessly.
•
If you encounter any issue with your device, please do not return it to the store. Please
review our FAQs & troubleshooting info or contact our tech support team for help at
www.kurioworld.com/support/
More tips and information at WWW.KURIOWORLD.COM
IMPORTANT INFORMATION -
PLEASE READ BEFORE SETTING UP YOUR KURIO
®
THE ULTIMATE TABLET BUILT FOR KIDS
Power ON/OFF/STANDBY
Micro USB/Charger
Child Menu
Back
Volume -
Front camera
Home Recent apps
Microphone
MicroSD
card slot
Headphone 3,5mm jack
This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted
by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser
required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower the power output. While there may be
differences between the SAR levels of various devices and at various positions, they all meet the government requirement.
