![kd frames Charleston Plus Platform Bed XL-TWIN Instructions Download Page 1](http://html1.mh-extra.com/html/kd-frames/charleston-plus-platform-bed-xl-twin/charleston-plus-platform-bed-xl-twin_instructions_3785336001.webp)
A-80-P BED RAIL (2) - 80”
A-37 REGULAR SLAT (14) - 37”
A-37-C CONNECTOR SLAT (2) - 37”
A-15L FOOTBOARD
LEFT LEG (1) 15”
A-15R FOOTBOARD
RIGHT LEG (1) 15”
A-40L HEADBOARD
LEFT LEG (1) 40”
A-40R HEADBOARD
RIGHT LEG (1) 40”
A-22 HEADBOARD PICKET (6) 22”
H A R D W A R E L I S T
1
H-10 HEX WRENCH
H-3 CROSS DOWEL
12
12
H-21 2 - 1/2” BOLT
H-20 1 - 1/2” WOOD SCREW
10
All wood is from the Tulip Poplar tree which can have dark streaks in the heartwood.
We try to use this wood for parts that don’t show in the final assembly. For a video
on how to assemble this frames, please visit kdframes.com.
P A R T S L I S T
#2 PHILLIPS HEAD SCREWDRIVER REQUIRED
Manufactured by
394 Dairy Pak Rd. • Athens, GA 30607
kdframes.com • [email protected]
CHARLESTON PLUS PLATFORM BED
XL-TWIN
Instructions for the
SKU# 3994-CP-XT
This bed frame is made with Tulip Poplar. Any green tint in the wood will change to light brown in a few
weeks. This will happen in 20 to 30 minutes if placed in direct sunlight. Tulip Poplar can be left unfinished,
clear finished, stained, or painted. Satin polyurethane (oil or water based) works well.
Painting: It is best to start with an interior primer and lightly sand before painting.
Staining: Light sand before staining. Wipe stain on with a rag until you get the desired color. If you are going
to use a top coat (such as polyurethane), do not sand again until after the first coat, and then be careful not
to sand away the stain.
Finishing: All finishes work well with Tulip Poplar. A simple was finish over stain (Minwax for example) is easy.
An oil finish such as Danish oil can be used. Or a clear coat such as polyurethane works well to seal the wood.
With polyurethanes, the first coat acts as a sanding sealer. You should lightly sand (180-220 grit sandpaper)
after the first coat, wipe the wood clean, and then build up coats for the desired effect.
Knockdown Frameworks, Inc. warrants all of its products for five years against any defects that are due to faulty materials or workmanship. We will
promptly correct such defects by replacement without charge. This warranty covers porduct defects only and will expire five years after date of
purchase by the original consumer purchaser, with proof of purchase required. This warranty does not apply to damage caused by and resulting
from misuse, neglect, accident, or improper operation, maintenance, storage, transportation, or handling of the product. This warranty is for the
original consumer purchaser for residential use only and does not apply if the product is used in any commercial application (such as rental
property). This warranty does not cover any incidental or consequental damages. If you feel that you have a claim under this warranty, please
contact us at [email protected].
A-33-HB HEADBOARD BOTTOM (1) - 33”
A-33-HT HEADBOARD TOP (1) - 33”
A-33-F FOOTBOARD (1) - 33”